Flying-Hobby
FUTABA S9452 DIGITAL HIGH SPEED/TORQUE SERVO
| SPECS | Speed |
| Torque | 127.8 oz-in @ 6V |
| Weight | 1.76oz (50g) |
| Length | 1.57" (40mm) |
| Width | .8" (20mm) |
| Height | 1.32" (33.6mm) |
| COMMENTS | S9451 Digital Servo Precautions, |
FEATURES: Digitally Enhanced Microprocessor Cut About half the Response Time From Transmitter Input To Servo Reaction. Coreless Motor with two ball bearings on output shaft Metal Gears (to replace, use FUTM3432) High Torque Case is Made of Black Plastic with newly developed mounting flanges Dust and Water Resistant (Not Waterproof) One year warranty, This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.,
This is the S9452 Digital Hi-Speed. Hi-Torque Servo for many ...Flying-Hobby
SCORPION BRUSHLESS MOTOR HK-5035-500KV (8MM SHAFT)
,
The Scorpion HK-5035-500 motor will provide all the power you ...Flying-Hobby
T-REX 500PRO DFC SUPER COMBO (DFC VERSION) + APS GPS SYSTEM (FREE EXPRESS SHIPPING)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Combo Included :, ●T-REX 500PRO DFC Kits Set X1, 3GX Programmable Flybarless System :, , Specification(3GX Programmable Flybarless System) :, T-REX 500 PRO DFC:, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
Free Express Shipping HC5112 ●3GX Flybarless System X1 set ●425 ...Flying-Hobby
EDGE 105MM SE PREMIUM CF TAIL ROTOR BLADES
| Specs | - Length |
| - Width | 28-32mm |
| - Root | 5mm |
| - Bolt Hole | 3mm |
Features:, - Airfoil designed specifically for high speed tail rotor application., Includes:, - One pair of EDGE blades.,
LE-105SE EDGE 105mm SE Premium CF Tail Rotor Blades EDGE ...Flying-Hobby
EDGE 115MM SE PREMIUM CF TAIL ROTOR BLADES
| Specs | - Length |
| - Width | 28-32mm |
| - Root | 5mm |
| - Bolt Hole | 3mm |
Features:, - Airfoil designed specifically for high speed tail rotor application., Includes:, - One pair of EDGE blades.,
LE-115SE EDGE 115mm SE Premium CF Tail Rotor Blades EDGE ...Flying-Hobby
EDGE 693MM SE PREMIUM CF BLADES - FLYBARLESS VERSION
| Specifications | Length |
| width | 60mm |
| root | 12mm |
| Bolt Hole | 5mm |
| Weight | 199 grams |
Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,
Product description LE-693SEFBL EDGE 693mm SE Premium CF Blades - ...Flying-Hobby
BMR-6CH-72MHZ (JR)RECEIVER
| Current Drain | 48 mA +/- 550 mA |
| Operating Voltage | 3.6~7.2V |
| Modulation | FM(PPM) |
| Sensitivity | 5uV |
| Range(on Ground) | 250m / 800’ ft |
| Size(W x L x H)? | 20.3 x 30.5 x 9.8 mm |
| Ant length | 100cm / 40” in |
| Weight Vertical | 8.6g |
Flying-Hobby
HELICOMMAND HC3-XTREME
| Supply voltage | 4 to 8 V |
| Max. tail rotational speed | 500°/s |
| Max. roll & pitch rotational speed | 650°/s (typical) |
| Servo frame rate | 55 Hz / 110Hz / 220 Hz selectable. |
| Tail servo output | 1,500µs / 760s selectable. |
| Maximum servo currents | Total 10A (continuous load) |
| Weight | Approx. 18g, with cable loom approx. 24g |
| Length of connecting cables to receiver | 90 mm |
| Dimension | 36 x 34 x 14mm |
Technical specifications:, Scope of supply:, - HC3-Xtreme including assembly material,
The HC3-Xtreme is a professional RIGID electronic unit and replaces ...Flying-Hobby
MAIN GEAR - MCPX (2PCS)
,
Main Gear，use POM as its material，high strength and high pressureproof. ...Flying-Hobby
ROTORTECH 560MM 3D CF BLADES (YELLOW TIP)
| Length | 560mm |
| Width | 53mm |
| Grip | >12mm |
| Hole | 3-4mm |
| Airfoil | Symmetrical |
| Tip | Aeroflat |
| Make | Carbon Fiber |
| Common Application | 30 Size RC Helicopters. Designed for hard 3D competition. |
Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
These 560mm carbon fiber main rotor blades are designed for ...Flying-Hobby
SCORPION BRUSHLESS MOTOR HKIII-4025-550KV(6MM)
| HK Patent No. | HK1141674 |
| China Patent No. | ZL2010 2 0298704.9 |
| Taiwan Patent no. | M399539 |
| All Others Worldwide Patent | Pending |
Flying-Hobby
TAIL ROTOR
| FEATURES | Composite plastic construction |
| INCLUDES | Two tail rotor blades |
| REQUIRES | Installation onto tail rotor assembly |
| SPECS | Length |
| Width | 20mm (0.79") |
| Thickness | 2mm (0.08") |
Flying-Hobby
T-REX 600E PRO DFC JR XG8 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
REACTOR X2 REGULATOR SYSTEM
The preset CCPM voltages are: 6.0V regulated for all standard and digital servos. 6.8V regulated for high voltage type servos and brushless series servos. In addition the new X2 now allows full unregulated Li-Po voltage (8.4V at full charge) to pass directly to the servos for maximum voltage to HV type servos., Reactor X2 Features and Specifications:,
As the unfailing heart of your helicopter. The Reactor X2 ...